Teklif İsteyin | Bize Ulaşın |

Many people pay a lot of attention at the time of washing to wash their clothes well and not damage the clothes. Separating the whites, washing clothes in the appropriate programs is not enough for a good wash. Because even machines whose task is cleaning today need cleaning. If this cleaning is not done, it can lead to many problems. So what is resistance cleaning? How is it performed?

At the very beginning of these problems, lime formation is observed in machines, especially during long-term use. This calcification can lead to a decrease in the washing performance of your machine and a deterioration of your machine.

Cleaning of Resistance in Washing Machines
Cleaning of Resistance in Washing Machines

Calcification in the Resistance

Resistors that have the task of heating water can also lead to problems such as water not heating up. One of the prominent causes of these non-heating problems is calcification. Calcification in the resistors is a common problem and it is quite easy to notice this problem.

It is necessary to intervene because the performance of your machine will decrease after calcification, because the water does not heat up, which can lead to big problems. The water needs to be heated for dirty clothes to be washed properly. Therefore, conditions such as calcification should not be taken lightly.

In cases of calcification in the resistance, support should be obtained from specialists, but you can intervene with several different methods to prevent the calcification problem from happening constantly. So what should be done in cases of calcification?

Resistance Cleaning by Natural Means

Natural ways are a frequently used method in our lives, and resistance cleaning is also possible with natural ways. Together with a mixture of carbonate and vinegar, cleaning of limescale accumulated in the resistance can be provided. By doing this method, you can see that the limescale decreases and the bad smells go away. In addition to a mixture of baking soda and vinegar, you can also choose a dish sponge for calcification in the resistance.

However, you need to be careful when using the carbonate and vinegar mixture method. Although you clean with a mixture of baking soda and vinegar, it can cause many problems such as rusting on new generation machines.

Cleaning of the Resistance with Chemical Substances

Another method is that you can clean the resistance with chemical substances. The most commonly used cleaning method is citric and acetic. Although this method is used a lot, it is a method that damages the parts when cleaning the limescale. So what needs to be done for a safer and more effective method of cleaning your machine by not using natural ways and chemicals?

Resistance Cleaning with Anti-Scale

One of the biggest problems in washing machines is calcification, and according to research, 83% of the water in Turkey is calcified. By using anti-scale, you can protect up to 93% of the scale formation in your machine and at the same time prevent your clothes from fading and fraying.

Anti-scale, it is necessary to use a scale with detergent for each wash. After use, it softens the water with a high lime content and prevents the formation of lime in your machine. By using anti-scale, you can extend the life of your washing machine and improve its washing performance.

Although this cleaning by natural means and chemical substances is not a sufficient and effective solution. For a safer and more effective method, you can use anti-scale. Click here for more information.

Hemen Arayın
WhatsApp